RA-912F Portable SF6 Gas Comprehensive Analyzer

For determining the quality of SF6 gas.SF6 purity analyzer .SF6 Dew point analyzer and SF6 Decomposition product analyzer 3 in 1.

[email protected]

Send Message Get a Quote

RA-912F allows the determination of up to three quality parameters with only one measurement:

SF6 concentration (%)

Moisture concentration

SO2 concentration (ppm)

RA-912F based on Thermal conductivity measuring SF6 purity of principle, only SF6 has spectral band absorption characteristics, interference from other components, to fully meet all kinds of electrical equipment using sulfur hexafluoride-filled with gases such as N2 or CF4;
Unique advanced cross-sensitivity to measure the decomposition algorithm, a large number of laboratory data foundation, integration of linear algebra algorithms to calculate the results more accurate;
Classic polymer film humidity measurement SF6, when ambient humidity changes, the moisture sensitive components of the dielectric constant is changed, a corresponding change in the output electrical signal.

1.Using the principle of SF6 gas spectral absorption measurements, rapid, without the interference of other gas components to better meet the needs of the site.

2.SF6 purity mass ratio (g / g), volume ratio (mol/mol) switch at any time to display, can be directly controlled national standard, eliminating the volume and mass ratio conversion link.

3.Massive experimental data, based on real-time traffic temperature compensation.

4.Unique patented drying protection device.

5.Boot-up zero, the slope of the self-calibration.

6.Built-in gas filtration system

7.Each measuring gas path individually designed to ensure accuracy, independent regulation is more suitable for field use.

8.TFT touchscreen

9.Built-in printer

swipe screen

TECHNICAL DATA
Dimensions	L 406 mm, W 538 mm, H 269 mm
Weight	15 kg
Input pressure	0.2 - 35 bar
Operating temperature	-20 °C to +50 °C
Ambient moisture	15% up to 90 % relative moisture, non condensing during operation
Operating voltage	100-240 VAC, 50/60Hz
Number of measured values to be stored	max.500
Interface	USB

	PURITY	MOISTURE	SO2	H2S	CO
Measuring principle	Thermal conductivity	Electronic moisture measurement (capacitive)	Electrochemical reaction	Electrochemical reaction	Electrochemical reaction
Measuring range	0 - 100 vol.%	-80 to +20 °C	0 to 100 ppm 0 to 10 ppm0 to 2000ppm	0 to 100 ppm	0 to 500 ppm
Measuring accuracy	±2 %(F.S)	±2 ℃	±5 % μL/L	±5 % μL/L	±5 % μL/L
Flow rate	250 to 350 mL/min Recommend 300 mL/min	300 to 900 mL/min Recommend 500 mL/min	100 to 120 mL/min Recommend 100 mL/min	100 to 120 mL/min Recommend 100 mL/min	100 to 120 mL/min Recommend 100 mL/min
Reaction time	< 30 s	< 3 min	< 60 s	< 60 s	< 60 s
Recommended calibration interval	every one years	every one years	every one years	every one years	every one years

SF6 Product